nhet_cn_back_charger/Service/WaterCool/Msg/Host/ModeMsg.cs

using HybirdFrameworkCore.Autofac.Attribute;

namespace Service.WaterCool.Msg.Host;

/// <summary>
/// 站控向水冷发送模式设定指令
/// 消息id 18FF45A7
/// </summary>
public class ModeMsg : BaseMsg
{
    /// <summary>
    /// BMS 请求设定模式
    /// 0关机模式，1制冷模式，2制热模式，3自循环模式
    /// </summary>
    [Property(32, 2)]
    public byte Mode { get; set; }

    /// <summary>
    /// 高压请求
    /// 0 上高压请求，1 下高压请求，2~3 无效
    /// </summary>
    [Property(34, 2)]
    public byte HighTension { get; set; }

    /// <summary>
    /// 充电状态
    /// 0 非充电模式，1 充电模式，2~3 无效
    /// </summary>
    [Property(36, 2)]
    public byte ChargState { get; set; }

    /// <summary>
    /// BMS 高压继电器状态
    /// 0 断开状态，1 闭合状态，2~3 无效
    /// </summary>
    [Property(38, 2)]
    public byte BMSState { get; set; }

    /// <summary>
    /// BMS 当前电压高字节
    /// 分辨率：1V /bit    偏移量：0   范围：0V~1000V     类型：测量    65535：无效
    /// </summary>
    [Property(40, 8)]
    public byte BMSHighByte { get; set; }

    /// <summary>
    /// BMS 当前电压低字节
    /// 分辨率：1V /bit    偏移量：0   范围：0V~1000V     类型：测量    65535：无效
    /// </summary>
    [Property(48, 8)]
    public byte BMSLowByte { get; set; }

    /// <summary>
    /// 保留
    /// </summary>
    [Property(56, 8)]
    public byte ReserveOne { get; set; }

    /// <summary>
    /// 设定温度
    /// 分辨率：1℃\bit          偏移量：-40℃ 单位：℃
    /// </summary>
    [Property(64, 8, PropertyReadConstant.Bit, 1, 0, 40)]
    public sbyte SetTemperature { get; set; }

    /// <summary>
    /// 保留
    /// </summary>
    [Property(72, 8)]
    public byte ReserveTwo { get; set; }

    /// <summary>
    /// 生命帧
    /// </summary>
    [Property(80, 8)]
    public byte HP { get; set; }

    /// <summary>
    /// CRC 效验值
    /// </summary>
    [Property(88, 8)]
    public byte CrcCheckValue { get; set; }
    
    
    public ModeMsg(byte mode,byte highTension,byte chargState,byte bmsState,sbyte setTemperature,byte hp,byte crcCheckValue)
    {
        Id = 0x18FF45A7;
        Mode = mode;
        HighTension = highTension;
        ChargState= chargState;
        BMSState= bmsState;
        SetTemperature = setTemperature;
        HP = hp;
        CrcCheckValue = crcCheckValue;
    }
    public ModeMsg()
    {
        Id = 0x18FF45A7;
        Mode = 0;
        HighTension = 3;
        ChargState= 0;
        BMSState= 3;
        SetTemperature = 0;
        BMSHighByte = 0;
        BMSLowByte = 0;
        HP = 0;
        CrcCheckValue = 0;
    }
    
}